Take out the printer from the sealed box with all its key components i.e. cables, cartridges, etc.
The next thing to do is, remove the polystyrene packaging wraps with the orange tapes along with the plastic covering from the printer.
The first thing for hardware setup is to find out the power socket on the printer. As mentioned in Canon Ij Setup guide, plug the power cable to the wall socket and then to the printer’s port.
After that, switch the printer on by pressing the power button. And you will find the printer’s display light on.
For inserting the ink tanks, remove the cartridges outlet seal and the plastic covers covering it.
The printhead carriage will adjust itself once you open the top cover of the printer. Put all the cartridges and put them into their correct slots.
After putting the cartridges into the slots, close the printer top cover and suddenly you will observe that the printer will start making noise. This is the indication that ink cartridge installation is successfully done.
After then, open the flap of the printer and then pull out the input tray and then, put some pages into the paper tray.
Put the paper tray back to its place properly.
This finally finishes the configuration of your Canon Printer via canon.com/ijsetup.
Best way fix to activate norton security suite-:
Open your Norton device security product.
In the main window, click Activate Now.
Click Next.
In the My service PIN field, type the PIN that is provided to you by your service provider.
Click Activate.
Type in a name for your computer, and then click Activate.
Close the Activation Complete!
canon mg3600 connect to wifi
Check9 Make sure the machine is not placed too far away from the wireless router. The machine can be up to 50 m (164 ft) from the wireless router indoors. Make sure the machine is close enough to the wireless router to be used. Check10 Make sure there is no source of radio wave interference nearby.
How do I setup my Canon all in one printer?
Remove the printer from its box and packaging materials.
Plug the power cord and adapter into the printer, then into an outlet on a surge protector.
Install the printer's ink cartridges.
Install the drivers and software for your Canon all-in-one printer.
Regards,
Willjoe